Number
|
Name
|
Description
|
1
|
Tactical Alert Red Alert General Quarters Battle Stations
|
- Defensive status signaling that a crew needs to be ready for combat.
- All nonessential personnel are to move to shelter areas.
- Damage control teams deployed to emergency locations.
- All combat stations to be fully crewed.
- Charge / arm all weapons.
- Raise shields at full power.
- Automatic diagnostics on primary and secondary systems.
- Secure and seal off critical areas.
- Security personnel deploy to defensive positions.
- Command personnel report to stations.
- All relevant preparations from Yellow Alert / Condition 3
|
2
|
Temporal Alert
|
|
3
|
Yellow Alert
|
- Charge defensive systems.
- Damage control teams ready to deploy.
- Security teams report to security office for deployment assignments.
- Department heads report to stations.
- Standby crews report to stations.
- Secure communications.
- Reduce power to non-essential systems.
|
4
|
Environmental Alert
|
- Damage control teams deploy to standby locations.
- Security teams deploy to evacuation locations.
- Medical teams deploy to standby locations.
- Seal all decks at critical cross-sections.
- Seal all decks from adjacent decks.
- Seal all external doors and access points.
- Seal jefferies tubes at all junctions.
- Set each decks environmental controls to independent operation.
- All non-essential personnel report to shelter areas.
|
5
|
Decompression Alert Collision Alert
|
- All relevant procedures of Environmental Alert.
- Damage control teams deploy to critical areas.
- Medical teams deploy to shelter areas.
- Seal all isolation doors on all decks.
- Erect emergency force fields around critical areas.
- Inertial dampeners to full power.
- Structural integrity field to full power.
- Command and control areas isolated to independent power.
- Evacuate outermost areas.
|
6
|
Grey Mode
|
- All non-essential systems powered down.
- Non-essential areas evacuated, including crew quarters, to shelter areas and powered down.
- Primary and secondary systems reduced to minimum power.
- Sensors to passive mode to reduce computer processing load.
- Reduce computer power to minimal levels.
- Replicators and transporters shut down.
- Propulsion systems set to minimal power output and shut down when not in use.
- Power generation systems put on load rotation to reduce fuel consumption.
|