Alert Conditions

Alert condition codes allow for standard procedures to be followed in specific conditions.

Colored Conditions

There are three standard conditions named after colors - these also correspond to the color of alert notification lights throughout a location.

• Condition Red / Red Alert
• Condition Yellow / Yellow Alert
• Condition Green / Normal Operations
• Grey Mode

Numbered Conditions

Number	Name	Description
1	Tactical Alert Red Alert General Quarters Battle Stations	Defensive status signaling that a crew needs to be ready for combat. All nonessential personnel are to move to shelter areas. Damage control teams deployed to emergency locations. All combat stations to be fully crewed. Charge / arm all weapons. Raise shields at full power. Automatic diagnostics on primary and secondary systems. Secure and seal off critical areas. Security personnel deploy to defensive positions. Command personnel report to stations. All relevant preparations from Yellow Alert / Condition 3
2	Temporal Alert	TDE / Dimensional Fold Drive brought online at ready status. Raise temporal shields to full power. Signal Starbase Pandora and report status and request continuous updates. Download current historical data from Starbase Tranquility and Starbase Pandora. Compare downloaded data with current conditions, ascertain temporal changes. Temporal Operatives report to commanding officer immediately.
3	Yellow Alert	Charge defensive systems. Damage control teams ready to deploy. Security teams report to security office for deployment assignments. Department heads report to stations. Standby crews report to stations. Secure communications. Reduce power to non-essential systems.
4	Environmental Alert	Damage control teams deploy to standby locations. Security teams deploy to evacuation locations. Medical teams deploy to standby locations. Seal all decks at critical cross-sections. Seal all decks from adjacent decks. Seal all external doors and access points. Seal jefferies tubes at all junctions. Set each decks environmental controls to independent operation. All non-essential personnel report to shelter areas.
5	Decompression Alert Collision Alert	All relevant procedures of Environmental Alert. Damage control teams deploy to critical areas. Medical teams deploy to shelter areas. Seal all isolation doors on all decks. Erect emergency force fields around critical areas. Inertial dampeners to full power. Structural integrity field to full power. Command and control areas isolated to independent power. Evacuate outermost areas.
6	Security Alert	Security teams deploy to critical areas. Post guards in critical areas. Post guards at turbolifts, access points to adjacent decks, and transporter rooms. Flag and command personnel are given armed escorts. Commanding Officer reports to the bridge / operations and localizes command functions to the bridge, main engineering, and auxiliary control. Executive Officer reports to auxiliary control ready to assume control of systems if other areas are compromised. Chief Engineer reports to main engineering ready to assume control of systems if other areas are compromised. Chief of Security organizes search teams and patrol teams. Department heads secure their stations. Non-essential personnel return to quarters. Secure all communication lines. Restrict computer access to Level 1 and above. Shut down transporters. Seal all external hatches and doors. Seal all decks from adjacent decks. Seal all access to jefferies tubes. Tactical officer begins intensive continuous sensor sweeps of surrounding area. Operations officer begins continuous internal sensor scans and reports all anomalous signals to chief of security. Department heads secure their areas and account for all personnel.
7	Grey Mode	All non-essential systems powered down. Non-essential areas evacuated, including crew quarters, to shelter areas and powered down. Primary and secondary systems reduced to minimum power. Sensors to passive mode to reduce computer processing load. Reduce computer power to minimal levels. Replicators and transporters shut down. Propulsion systems set to minimal power output and shut down when not in use. Power generation systems put on load rotation to reduce fuel consumption.